Weller WS80 - Manual

1
WS80 SOLDERING STATION
1. Power switch
2. Optical regulator (LED)
3. Rotary potentiometer for setting temperature
(300°F - 850°F)
4. Key switch
5. Connection receptacle for soldering iron
6. Power supply connector
7. Fuse/Holder
WARNING: This product, when used for soldering and
similar applications, produces chemicals
known to the State of California to cause
cancer and birth defects or other
reproductive harm.
DESCRIPTION
CONTROL UNIT
The soldering station WS80 is a part of the range of products, which were developed for industrial manufacturing as well
as for the repair and laboratory sector. The analog electronic control system guarantees the best possible control perfor-
mance for various soldering tools. The high-powered 24 V heating elements make excellent dynamic performance
possible, so that the soldering tools can be used universally.
A grounded soldering iron tip, zero power switch and antistatic design of control unit and iron complete the high quality
standard. The desired temperature can be set by a rotary potentiometer in an infinitely variable range between 300°F-
850°F.
The set temperature can be locked by the key switch (4) integrated in the front plate. Temperature settings cannot be
changed when the unit is locked. A blinking red LED signals that the preset temperature has been reached - this serves
as an optical regulator. This station meets all applicable MIL-STD’s and the J-STD-001B standards.
SOLDERING IRONS
WSP80:
The soldering iron WSP80 is characterized by its capacity for reaching the soldering temperature quickly and
precisely. Its slim design and heating power of 80 watts makes universal usage possible - from extremely
fine applications to high-temperature soldering work. Work can be continued immediately after switching
soldering tips, since the temperature is reached again quickly.
See “Accessories” for additional tools.
CAUTION: (For Removing Tip) turn station “OFF” before removing tip/retainer. Hold iron tip down to remove
tip retainer and tip.