CCI Thermal Technologies NGS - NGS1000 Natural Gas Scrubbing System - Manual

Figure 1 NGS 1000
Natural Gas Scrubber
NGS-4 and NGS-12
APPLICATION
Gas Scrubber
NGS - 4
NGS-12 NGS-4
Outlet
Outlet
Inlet
Inlet
Natural Gas
Scrubber
4 = ¼″ SCFM
12 = ¾″ SCFM
Designed specifically for industrial applications with natural gas
supply lines such as:
• Cata-Dyne™ Series MKII, WX and BX heaters
• Enclosure systems
• Instrument gas pre-heaters
STANDARD PRODUCT FEATURES
• CRN Certified (0H6573.213) to 250 psi and 93°C (200°F)
• Two sizes available
SIZE 4, 10 SCFM Ø1/4” NPT
SIZE 12, 25 SCFM Ø3/4” NPT
MOUNTING OPTIONS
With appropriate brackets, the NGS 1000 natural gas scrubber can
be installed in an existing piping system or it can be bolted to a
wall or panel using the factory supplied stainless steel wall
mounting kit.
FEATURES
CRN CERTIFIED # 0H6573.213
Max. Pressure = 250 psi
Max. Temperature = 200ºF (93ºC)
Min. Temperature = -40ºF (-40ºC)
Flow Rates: 10 SCFM to 25 SCFM
SAE/ORB O-ring design
BENEFITS
• Extend the life of your Cata-Dyne™ infrared heater if sour gas or
moisture is present.
• Low-pressure drop at rated flow.
Table 1 Model Coding
NPT Size
NGS 1000 NATURAL GAS SCRUBBERS
NGS-4 AND NGS-12 UNITS
INSTALLATION, OPERATION
AND MAINTENANCE INSTRUCTIONS
E-mail: [email protected] www.ccithermal.com
M20412.Rev. 10.01 Date of Issue: February 2013
Head Office & Factory:
5918 Roper Road, Edmonton, Alberta, Canada T6B 3E1
Telephone: (780) 466-3178 Fax: (780) 468-5904
Toll Free: 1-800-661-8529
Printed In Canada