OSRAM SYLVANIA ProPoint Outdoor Luminaire Post Top 2 - Manual

ProPoint TM Outdoor Luminaire Post Top 2
Installation Guide
Read all instructions carefully before attempting
installation. If you do not understand these
instructions, please consult your local distributor.
Thoroughly inspect the luminaire for any freight
damage. Freight damage should be reported to the
delivery carrier.
Compare the catalog/model number description on
the packing slip with the fixture label to assure that
you have received the correct product.
Disconnect power during installation and before
servicing.
Product is for outdoor installation and use only.
To avoid risk of fire or shock, this fixture must be
wired in accordance with the National Electric Code
and applicable local codes or ordinances.
All work should be performed by a qualified
electrician.
To ensure personal safety, proper grounding is
required.
Traditional cut off pendant lantern. Dark
sky compliant, top mounted horizontal
LED assembly. Horizontal flat tempered
glass (optional external vertical glass
surfaces)
www.sylvania.com
Safety Warnings:
Luminaire Installation:
Verify power is off prior to wiring luminaire
Connect neutral, hot, and ground
wires from luminaire to wiring pole
(black, white, & green wires).
Loosen (8) set screws on fitter.
Slide luminaire over ø3
” O.D. x3”H
Tenon\pole. (Use caution not to
slice or fray wiring when sliding
luminaire over Tenon.
Tighten all 8 set screws. Power up luminaire.
Locking thumb screw knob
Fitter to receive ø 3”O.D.x3”H. Tenon
Connect wiring using quick
disconnects connectors ø3”O.D.x3”H
Tenon
LED189
Tighten set screw
(4 @ 90 degrees)