Other indicators (on all led bars), Microrouter 1270i switch settings – Compatible Systems MicroRouter 1270i User Manual
Page 40
34
Appendix C - LED Patterns and Test Switch Settings
Other Indicators (on All LED Bars)
5,6 flashing: Router stacks starting up
3,4 & 7,8 flashing: No OS loaded. Running from ROM.
5,6 on solid, 2 (bars 1 & 3) and 9 (bars 2 & 4) flashing: Erasing OS in
Flash ROM
4,5,6,7 on solid, 2 (bars 1 & 3) and 9 (bars 2 & 4) flashing: Erasing
config in Flash ROM
Scanning from 2 to 9 (bars 1 & 3), and scanning from 9 to 2 (bars 2 &
4): Flash ROM erase due to switch setting five or six is complete. Set
switch to zero and cycle power.
v
Note
: Any continuous flashing pattern not noted in this chapter may
be caused by a hardware failure. Please call Compatible Systems Tech-
nical Support if your router shows a hardware failure.
MicroRouter 1270i Switch Settings
M
Caution:
Settings marked with an asterisk may erase your Flash
ROM. Please do not use these settings without first contacting
Compatible Systems Technical Support.
0
Normal Operation
1
Unused*
2
Unused*
3
Run Boot ROM Downloader
4
Unused*
5
Erase Flash ROM (OS and Configuration)
6
Erase Flash ROM (Configuration Only)
7
Unused*
8
Unused*
9
Allow letmein password for 5 minutes after powerup