SARGENT 7900 Mortise Lock - Manual

2
INSTALLATION INSTRUCTIONS for 7900 & 8200
Mortise Locks with Studio Collection Levers
FOR INSTALLATION ASSISTANCE CALL SARGENT AT 1-800-727-5477 • www.sargentlock.com
1
All trim components shown will vary by function number
Trim one-side functions - refer to separate instruction sheet
Tools Required:
• Phillips screwdriver
(# 2 and # 3 size)
• Flat blade screwdriver
• 1/8" Allen wrench
Screw Pack with screws for lockbody,
fronts & strike screws (part #77-4236)
Trim both side pack includes inside
adapter plate assembly, spindle,
through-bolt screws and set screw
• Rose Trim - #79-2161
• Escutcheon Trim - #82-4600
Trim one side pack includes inside
adapter plate assembly, spindle,
through-bolt screws, set screw and
trim one side plate.
• Rose Trim - #79-2162
• Escutcheon Trim #82-4599
Description Part No. Req.
1 Inside lever (designs vary- some handed) — 1
2 Lever set screw 1/4-28 (wide flat head) 82-0695 1
3 Lever spring 82-0347 2
4 Rose (designs vary) 696 x Design 2
5 Machine screw #8-32 x 5/8" 01-1495 2
6 Inside adapter & plate assembly Varies 1
7 Spindle 82-0368 2
8 Bushing 82-0691 1
9 Outside rose mounting plate Varies 1
10 Through-bolt posts 81-0723 2
11 Outside lever (designs vary-some handed) — 1
12 Lockbody (various functions) — 1
13 Machine screw #12 - 24 x 1/2" and 01-1019 2
Wood screw #12 x 1-1/4" 01-2299 2
14 Outside front plate Varies x Function 1
15 Front screw #8 - 32 x 1/4" 01-1028 2
16 Thumb turn assembly (Varies x Design) 130 x Design -
17 Cylinder collar/rosette (size varies) 1KB (or larger) 1
18 Cylinder (various key systems) — -
19 Emergency release assembly
Varies x Design
184 x Design -
Outside Lever
& Rose Assembly
1
3
4
5
6
7
15
13
14
12
16
17
18
7
8
9 10
4
3
11
19
Copyright © 2007-2008, Sargent Manufacturing Company, an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the express written
permission of Sargent Manufacturing Company is prohibited.
A7896B