Canon BJC-620 - Manual (Page 85)

,%0 $SWLYD
•
Fl to Enter Setup
•
Advanced Options
•
Select Input/Output Options
•
Press Enter
•
Highlight Parallel Printer Options
•
Select Using the Right and Left Arrow Keys
,%0 7KLQNSDG %,26 ,QVWUXFWLRQV
•
Hold Fl Down While Turning on Computer
•
Cursor Over to Config Icon
•
Press Enter
•
Cursor Over to Parallel
•
Hit Enter
•
Cursor Over to Bi-directional and Hit Enter
•
Go to Bottom and Hit OK
•
Go to Bottom and Hit OK
•
Cursor Over to Restart and Hit OK
0,&521 7 Z3KRHQL[ %,26
•
Press F2 to Enter BIOS
•
Cursor to Advanced System Setup and Hit Enter
•
Cursor to Integrated Peripherals and Hit Enter
•
Cursor to LPT MODE: (AT)
•
Use Gray Plus Key to Select ECP
•
Hit Escape Twice
•
Cursor to Exit and Hit Enter
•
Answer "Yes" to Save Settings
3DFNDUG %HOO   &3
•
Press Fl to enter Setup.
•
Hit Right Arrow Key until you get to Advanced.
•
Cursor to Peripheral Configuration
•
Hit Enter
•
Cursor Down to Parallel Port Mode (will say Bi-directional)
•
Hit Enter
•
Cursor Down to ECP and Hit Enter
•
Press Escape
•
Hit FlO to Save and Exit
•
Hit Enter