B&G Triton Display User Manual

Quick reference guide

Advertising
background image

Triton Display & Pilot Controller

Quick Reference Guide

Display Keys

Menu / Enter / Lighting: Used to enter the main menu, select sub menus and confirm
selection. Note: Press and hold the Enter key for 3 seconds takes you directly to the display
setup lighting level screen. If the lighting level is set below 5 it will automatically increase to 5.
Use the up and down keys to set the desired level and press Enter to confirm.

Page: Scrolls through the eight default display pages and navigates back a step in menus.
Note: the eight default display pages including the autopilot page can be customized to
display the required data.

Directional keys: Scrolls up and down through selected menus / set values.

Pilot Controller Keys

Mode: Changes the Pilot mode.
When the Pilot’s boat type is set to Sail and Auto mode is engaged pressing the mode key
will change the Pilot to Wind mode. If the Pilot is set for any other boat type and the Pilot is in
Auto mode pressing the mode key will enter the Pilot into No Drift mode. For all boat types,
when in Auto mode a long key press of the mode key will enter the Pilot into Navigation
mode which will require confirmation via the display before it is engaged.

STBY: Disengages the autopilot. Places the autopilot into Standby mode.

Left 1º: Adjust the set course or wind angle 1 degree / steer to Port in Non Follow Up mode.
When pressed in Standby mode this will enter the autopilot into Non Follow Up mode.

Right 1º: Adjust the set course or wind angle 1 degree / steer to Starboard in Non Follow Up
mode. When pressed in Standby mode this will enter the autopilot into Non Follow Up mode.

Left 10º: Adjust the set course or wind angle 10 degrees / steer to Port in Non Follow Up
mode. When pressed in Standby mode this will enter the autopilot into Non Follow Up mode.

Right 10º: Adjust the set course or wind angle 10 degree / steer to Starboard in Non Follow
Up mode. When pressed in Standby mode this will enter the autopilot into Non Follow Up
mode.

Auto: Engage the autopilot / Switch the autopilot to Auto mode.

Changing the Pilot mode

3 SEC

Boat Type:
• Displacement
• Outboard
• Planing

Boat Type:

• Sail

Mode Symbol

Function / Mode

S

Standby

A

Auto (Compass)

W

Wind

N

Navigation

ND

No Drift

NFU

Non Follow Up (Power steer)

Tack & Gybe in Wind mode

To tack or gybe in Wind mode press both 1º course keys on the Pilot controller.

EN

www.bandg.com

Part No.988-10135-004 - Section 1 of 5

Advertising