Canon FB620P - Manual (Page 26)

26
Connecting the Power Cord (Turning on the Power)
The scanner is powered by the AC adapter supplied in the package.
1. Connect the power cord plug to the power terminal on the scanner.
2. Plug the AC adapter into an electrical outlet.
• Do not use an AC adapter other than the one supplied with the scanner.
Other adapters may damage the equipment.
• There is no power switch on this scanner. The power is activated as soon as
the AC adapter is plugged into a power source. The unit can be left on
standby with the AC adapter plugged in under normal operating conditions.
• To power down the scanner, first turn off the computer and other periph-
eral devices before unplugging the scanner’s AC adapter from the electri-
cal outlet.
Power Terminal
AC Adapter
Power Terminal
Power Cord