Motorola SURFboard SBG901 - Manual (Page 45)

B
6 • Advanced Pages 44
Advanced IP Filtering Page
This page allows you to define which local PCs will be denied access to the SBG901
WAN. You can configure IP address filters to block Internet traffic to specific network
devices on the LAN by entering starting and ending IP address ranges. Note that you
only need to enter the LSB (Least-significant byte) of the IP address; the upper bytes of
the IP address are set automatically from the SBG901 Configuration Manager’s IP
address.
The Enabled option allows you to store filter settings commonly used but not have them
active.
Field Descriptions for the Advanced IP Filtering Page
Field Description
Start Address Enter the starting IP address range of the computers for which you
want to deny access to the SBG901 WAN. Be sure to only enter
the least significant byte of the IP address.
End Address Enter the ending IP address range of the computers you want to
deny access to the SBG901 WAN. Be sure to only enter the least
significant byte of the IP address.
Enabled Activates the IP address filter, when selected.
Checkmark Enabled for each range of IP addresses you want to
deny access to the SBG901 WAN.
When done, click Apply to activate and save your settings.