Motorola SURFboard SBG901 - Manual (Page 70)

B
9 • Wireless Pages 69
Wireless 802.11 Access Control Page
This page allows you to configure the Access Control to the AP as well as status on the
connected clients.
Field Descriptions for the Wireless 802.11 Access Control Page
Field Description
MAC Restrict Mode Selects whether wireless clients with the specified MAC
address are allowed or denied wireless access.
Select Disabled to allow all clients.
MAC Address A list of wireless client MAC addresses to allow or deny based
on the Restrict Mode setting. Valid input MAC address formats
are XX:XX:XX:XX:XX:XX and XX-XX-XX-XX-XX-XX.
Connected Clients A list of connected wireless clients. When a client connects
(associates) to the network, it is added to the list; when a client
leaves (disassociates) from the network, it is removed from the
list. For each client, the age (in seconds), estimated average
receive signal strength (in dBm), IP address, and host name are
presented. The age is the amount of time elapsed since data
was transmitted to or received from the client.