2 system realtime message, 3 system exclusive message – Yamaha LS9 User Manual

Page 261

Advertising
background image

MIDI Data Format

261

LS9-16/32 Owner’s Manual

Appendices

1.4 PROGRAM CHANGE

(Cn)

Reception
If [PROGRAM CHANGE ECHO] is ON, bank select messages will also be
echoed from MIDI OUT.
If SINGLE CH is selected, these messages are received if [PROGRAM CHANGE
Rx] is ON and the [Rx CH] matches. However if [OMNI] is ON, these messages
are received regardless of the channel. When these messages are received, scene
memory and effect library are recalled according to the settings of the
[PROGRAM CHANGE EVENT LIST].

Transmission
If [PROGRAM CHANGE Tx] is ON, these messages are transmitted according
to the [PROGRAM CHANGE Table] settings when scene memory and effect
library are recalled.
If SINGLE CH is selected, these messages are transmitted on the [Tx CH]
channel.
If the recalled scene memory and effect library has been assigned to more than
one PROGRAM NUMBER, the lowest-numbered PROGRAM NUMBER for
each MIDI channel will be transmitted.
PROGRAM CHANGE messages are not used for transmission to LS9 Editor
because there is no guarantee that the contents of the assignment tables will
match. (PARAMETER CHANGE messages are always used.)
You can choose either MULTI MIDI CH or SINGLE CH.

If SINGLE is selected
You can choose the Rx CH, OMNI CH, and Tx CH.
You can choose whether a bank select message will be added.
A bank of up to 16 can be specified.

If MULTI is selected
The Rx and Tx channels will be the same.
The assignment table will use the settings for each MIDI channel. Bank select
messages will not be added.
You can make settings for up to sixteen MIDI channels.

2 SYSTEM REALTIME MESSAGE

2.1 SONG SELECT

(F3)

Select the track number shown in the TITLE LIST screen of the USB memory
recorder.

2.2 TIMING CLOCK

(F8)

Reception
This message is used to control effects. This message is transmitted twenty-four
times per quarter note.
Echoing of this message depends on the OTHER item in the ECHO settings.

2.3 ACTIVE SENSING

(FE)

Reception
Once this message has been received, MIDI communication will be initialized
(e.g., Running Status will be cleared) if no message is received for an interval of
400 ms.
This message is not subject to echoing.

2.4 SYSTEM RESET

(FF)

Reception
When this message is received, MIDI communication will be initialized (e.g.,
Running Status will be cleared).
This message is not subject to echoing.

3 SYSTEM EXCLUSIVE MESSAGE

3.1 MMC

< MMC STOP >

Reception
If the [DEVICE NO.] matches or is 7F, receives this message and stops.

< MMC PLAY >

Reception
If the [DEVICE NO.] matches or is 7F, receives this message and starts playback.

< MMC DEFERED PLAY >

Reception
If the [DEVICE NO.] matches or is 7F, receives this message and starts playback.

< MMC RECORD STROBE >

Reception
If the [DEVICE NO.] matches or is 7F, receives this message, and if stopped,
starts recording.

< MMC PAUSE >

Reception
If the [DEVICE NO.] matches or is 7F, receives this message, and if playing,
pauses.

STATUS

1100nnnn Cn

Program change

DATA

0nnnnnnn nn

Program number (0-127)

STATUS

11110011 F3

Song select

Song number 0sssssss ss

Song number (0-127)

STATUS

11111000 F8

Timing clock

STATUS

11111110 FE

Active sensing

STATUS

11111111 FF

System reset

STATUS

11110000 F0

System exclusive message

ID No.

01111111 7F

Real time System exclusive

Device ID

0ddddddd dd

Destination (00-7E, 7F:all call)

COMMAND

00000110 06

Machine Control Command(MCC) sub-id

00000001 01

Stop(MCS)

EOX

11110111 F7

End of exclusive

STATUS

11110000 F0

System exclusive message

ID No.

01111111 7F

Real time System exclusive

Device ID

0ddddddd dd

Destination (00-7E, 7F:all call)

COMMAND

00000110 06

Machine Control Command(MCC) sub-id

00000010 02

Play(MCS)

EOX

11110111 F7

End of exclusive

STATUS

11110000 F0

System exclusive message

ID No.

01111111 7F

Real time System exclusive

Device ID

0ddddddd dd

Destination (00-7E, 7F:all call)

COMMAND

00000110 06

Machine Control Command(MCC) sub-id

00000011 03

Deferred Play(MCS)

EOX

11110111 F7

End of exclusive

STATUS

11110000 F0

System exclusive message

ID No.

01111111 7F

Real time System exclusive

Device ID

0ddddddd dd

Destination (00-7E, 7F:all call)

COMMAND

00000110 06

Machine Control Command(MCC) sub-id

00000110 06

Record strobe

EOX

11110111 F7

End of exclusive

STATUS

11110000 F0

System exclusive message

ID No.

01111111 7F

Real time System exclusive

Device ID

0ddddddd dd

Destination (00-7E, 7F:all call)

COMMAND

00000110 06

Machine Control Command(MCC) sub-id

00001001 09

Pause(MCS)

EOX

11110111 F7

End of exclusive

Advertising