Yamaha LS9 User Manual
Page 37
37
3
Basic oper
ations on the LS9
LS9-16/32 Owner’s Manual
Using the tool buttons
●
GEQ library
The GEQ library holds two types of data; 31BandGEQ
or Flex15GEQ. Recall is not possible if you’ve
selected a type that is different than the recall-destina-
tion GEQ.
●
Effect library
Effect settings whose effect type is “HQ.Pitch” or
“Freeze” can be recalled only to racks 5 or 7. They
cannot be recalled if any other rack is selected.
If you select a library item number that cannot be
recalled, the RECALL button will be disabled.
5
Move the cursor to the RECALL button and
press the [ENTER] key.
The selected data will be loaded into the channel (EQ/
dynamics) or rack (GEQ/effect) you selected in step 2.
● Storing data in a library
1
Access a popup window or screen that con-
tains tool buttons.
2
Select the channel (EQ/dynamics) whose
settings you want to store, or the rack in
which the GEQ/effect whose settings you
want to store is already mounted.
3
Move the cursor to the LIB button in the
toolbar and press the [ENTER] key to
access the popup window or screen of the
corresponding library.
4
Move the cursor to the list, and use the dial
or the [DEC]/[INC] keys to select the store-
destination library number.
5
After you’ve selected the store-destination,
move the cursor to the STORE button and
press the [ENTER] key.
The LIBRARY STORE popup window will appear,
allowing you to assign a name to the data. For details
on entering text, refer to “Assigning a name” (
6
When you’ve assigned a name to the data,
move the cursor to the STORE button in the
LIBRARY STORE popup window and press
the [ENTER] key.
A dialog box will ask you to confirm the Store opera-
tion.
7
To execute the Store operation, move the
cursor to the OK button and press the
[ENTER] key.
The current settings will be stored in the library num-
ber you selected in step 4. If you decide to cancel the
Store operation, move the cursor to the CANCEL but-
ton instead of the OK button, and press the [ENTER]
key.
• You also have the option of displaying a dialog box that asks
you to confirm the recall operation (
HINT
STORE button
• Even after you’ve stored the settings, you can edit the title of
the data by moving the cursor to the data name in the list and
pressing the [ENTER] key to access the LIBRARY TITLE
EDIT popup window. However, you can’t rename read-only
data (indicated by the “R” symbol).
HINT
• Please be aware that if you store to a location that already
contains data, the existing data will be overwritten. (However,
you can’t overwrite read-only data.)
• Don’t turn off the power while the Store operation is in
progress. The data will not be stored correctly if you do so.
NOTE