Sending a delayed fax – Dell 2335DN User Manual

Page 177

Advertising
background image

4.

5.

You can also use one, two, or three-digit speed dial or group dial numbers.

Press Select (

) to confirm the number. The display asks you to enter another fax number.

6.

Press Select (

) to enter other number.

7.

Or, press Scroll (

or

) to select No and then press Select (

).

If you want to enter more fax numbers, repeat steps 5 and 7 . You can add up to 10 destinations.

8.

NOTE:

You cannot use more than one group dial number per broadcast operation.

When you finish entering fax numbers, press Start (

).

9.

The document is scanned into the memory before transmission. The display shows the memory
capacity and the number of pages being stored in the memory.

For documents loaded on the document glass, the display asks if you want to load another page.
Select Yes to add. Otherwise, select No .

The printer begins sending the document in the order of the numbers that you have entered.

10.

Sending a Delayed Fax

You can set your printer to store and then send a fax at a later time.

Load the document(s) face up with top edge in first into the DADF.

1.

OR

Place a single document face down on the document glass.

For details about loading a document, see "Loading an Original Document" .

Press Scroll ( or ) to highlight Fax and then press Select (

).

2.

Adjust the document contrast and resolution to suit your fax needs.

3.

For details, see "Adjusting the Document Contrast" and "Adjusting the Document Resolution" .

Press Scroll (

or

) to highlight Delay Fax to: and then press Select (

).

4.

Enter the number of the remote machine using the number keypad.

5.

Advertising