Removing and installing parts, Before you begin, Recommended tools – Dell Inspiron 530 User Manual

Page 105

Advertising
background image

Removing and Installing Parts

105

Removing and Installing Parts

CAUTION:

To guard against likelihood of electric shock, laceration by moving fan

blades or other unexpected injuries, always unplug your computer from the
electrical outlet before opening the cover.

CAUTION:

Do not operate your computer with any cover(s) (including computer

covers, bezels, filler brackets, front-panel inserts, and so on) removed.

CAUTION:

Some of the parts described in this chapter may be replaceable by a

certified service technician only and are not custom replaceable.

Before You Begin

This chapter provides procedures for removing and installing the components
in your computer. Unless otherwise noted, each procedure assumes that the
following conditions exist:

You have performed the steps in "Turning Off Your Computer" on page 106
and "Before Working Inside Your Computer" on page 106.

You have read the safety information in the Dell™ Product Information Guide.

A component can be replaced or—if purchased separately—installed by
performing the removal procedure in reverse order.

Recommended Tools

The procedures in this document may require the following tools:

Small flat-blade screwdriver

Small Phillips screwdriver

Small plastic scribe

Flash BIOS executable update program on the Dell Support website at
support.dell.com

book.book Page 105 Monday, October 6, 2008 11:28 AM

Advertising