Dell POWEREDGE 2950 - Manual (Page 79)

Installing System Components
79
Figure 3-19. Installing and Removing the Expansion-Card Cage
6 Lift the cage straight up to clear the chassis. See Figure 3-19.
Replacing the Expansion-Card Cage
CAUTION:
Only trained service technicians are authorized to remove the system cover and access any of the
components inside the system. See your Product Information Guide for complete information about safety
precautions, working inside the computer, and protecting against electrostatic discharge.
1 Align the guides on each end of the expansion-card cage with the pins on the system board, and lower
the cage. See Figure 3-19.
2 Install any expansion cards.
3 Reconnect all expansion-card cables.
4 Close the system. See "Closing the System" on page 55.
1 expansion-card cage 2 chassis pins (2) 3 release latches (2)
1
2
3
Book.book Page 79 Friday, February 3, 2006 11:09 AM