John Deere 318 User Manual

Page 158

Advertising
background image

21. Remove metering ring and upper and lower seals
(A). If the bore (B) is scored, the metering ring must be
replaced.

M36843

-UN

-29AUG88

IMPORTANT: Do not clamp metering assembly in a

vise.

22. Remove metering assembly. Put assembly on a
clean surface.

M36844

-UN

-29AUG88

23. Remove commutator seal (A).

24. Remove 11 screws to remove commutator cover.
Inspect screws for damage and replace if necessary.

25. Check commutator cover machined surface for nicks,
burrs, scoring, or unusual wear. A polished pattern due
to rotation of the commutator is normal.

M36845

-UN

-29AUG88

IMPORTANT: Handle commutator ring with care; it is

easily broken.

26. Remove commutator ring and inspect for wear, burrs,
cracks, or scoring.

NOTE: The commutator ring and commutator are a

matched set. If either is worn or damaged, both
must be replaced.

M36847

-UN

-29AUG88

MX,15906006,17 -19-01MAR95

MX,15906006,18 -19-01MAR95

MX,15906006,19 -19-01MAR95

MX,15906006,20 -19-01MAR95

Steering—318 and 420/Steering Valve

TM1590 (17MAY95)

60-06-8

316, 318 & 420 Lawn and Garden Tractors

020895

60

06

8

Advertising
This manual is related to the following products:

316, 420