John Deere 318 User Manual

Page 166

Advertising
background image

IMPORTANT: The following procedure must be used

to minimize an out-of-round condition
between commutator ring and drive
plate. The commutator ring is
self-centering when the drive plate is
shimmed. Use DFMX2 Alignment
Shims.

26. Install metering assembly, with drive plate (A) up into
metering ring (B).

27. Install two DFMX2 Alignment Shims (C) each
between drive plate and metering ring 120˚ apart. (See
Section 299 for instructions to make shims.)

M36864

-UN

-29AUG88

28. Turn metering ring over on a flat surface and push
metering assembly down. Tighten 11 screws in several
steps and in the sequence shown to 1.4 N·m (12 lb-in.).

M36865

-UN

-29AUG88

MX,15906006,41 -19-10MAR95

MX,15906006,42 -19-01MAR95

Steering—318 and 420/Steering Valve

TM1590 (17MAY95)

60-06-16

316, 318 & 420 Lawn and Garden Tractors

020895

60

06

16

Advertising
This manual is related to the following products:

316, 420