Remove and install steering gearbox and shaft – John Deere 318 User Manual

Page 134

Advertising
background image

REMOVE AND INSTALL STEERING
GEARBOX AND SHAFT

1. Remove drive shaft. (See procedure in Section 50,
Group 25.)

2. Remove engine side panels, battery and battery base.

3. Remove fender deck.

IMPORTANT: Do not pound on end of steering shaft

or damage to steering shaft will occur.

4. Remove steering wheel.

N

CAUTION: To avoid injury from escaping fluid
under pressure, stop engine and relieve the
pressure in the system before disconnecting or
connecting hydraulic or other lines. Tighten all
connections before applying pressure.

5. Disconnect lines (A, B and C) from hydraulic control
valve.

X9811

-UN

-23AUG88

M33937

-UN

-03OCT89

6. Remove nut and line clamp.

M33938

-UN

-03OCT89

MX,15906005,1 -19-29MAR95

MX,15906005,2 -19-10MAR95

Steering—316/Gearbox

TM1590 (17MAY95)

60-05-2

316, 318 & 420 Lawn and Garden Tractors

020895

60

05

2

Advertising
This manual is related to the following products:

316, 420