HP LaserJet 1320 - Manual (Page 89)

Cleaning the pickup roller
If you want to clean the pickup roller rather than replace it, follow the instructions below:
1. Remove the pickup roller as described in steps 1 through 9 of Changing the pickup roller .
2. Dab a lint-free cloth in water, and scrub the roller.
3. Using a dry, lint-free cloth, wipe the pickup roller to remove loosened dirt.
4. Allow the pickup roller to dry completely before you reinstall it in the printer (see steps 10
through 17 of Changing the pickup roller ).
ENWW Cleaning the pickup roller 79