HP laserjet m1212nf - Manual (Page 104)

Change the copy quality setting (M1130 Series)
NOTE: For this model, you cannot change the copy-quality setting for individual copy jobs. Use this
procedure to change the default copy-quality setting for all copy jobs.
1. Use the printer driver to change the default settings. Follow the appropriate procedure, depending
on the operating system you are using.
Windows XP, Windows Server 2003, and Windows Server 2008 (using the
default Start menu view)
a. Click Start, and then click Printers and Faxes.
b. Right-click the driver icon, and then select Properties.
c. Click the Device Settings tab.
Windows XP, Windows Server 2003, and Windows Server 2008 (using the
Classic Start menu view)
a. Click Start, click Settings, and then click Printers.
b. Right-click the driver icon, and then select Properties.
c. Click the Device Settings tab.
Windows Vista
a. Click Start, click Control Panel, and then in the category for Hardware and Sound
click Printer.
b. Right-click the driver icon, and then select Properties.
c. Click the Device Settings tab.
Mac OS X 10.4
a. From the Apple menu , click the System Preferences menu and then click the Print &
Fax icon.
b. Click the Printer Setup button.
Mac OS X 10.5 and 10.6
a. From the Apple menu , click the System Preferences menu and then click the Print &
Fax icon.
b. Select the product in the left side of the window.
c. Click the Options & Supplies button.
d. Click the Driver tab.
2. Select the appropriate Copy Quality setting.
90 Chapter 8 Copy ENWW