HP laserjet m1212nf User Manual
Page 126
Use the control panel to set the fax time, date, and header
To use the control panel to set the date, time, and header, complete the following steps:
1.
At the control panel, press the Setup button.
2.
Use the arrow buttons to select the System setup menu, and then press the
OK
button.
3.
Use the arrow buttons to select the Time/Date menu, and then press the
OK
button.
4.
Use the arrow buttons to select the 12-hour clock or 24-hour clock, and then press the
OK
button.
5.
Use the keypad to enter the current time.
6.
Complete one of the following:
●
For the 12-hour clock, use the arrow buttons to move past the fourth character. Select
1
for
a.m. or
2
for p.m. Press the
OK
button.
●
For the 24-hour clock, press the
OK
button.
7.
Use the keypad to enter the current date. Use two digits to specify the month, day, and year. Press
the
OK
button.
8.
Use the arrow buttons to select the Fax setup menu, and then press the
OK
button.
9.
Use the arrow buttons to select the Fax header menu, and then press the
OK
button.
10.
Use the keypad to enter your fax number and your company name or header, and then press the
OK
button.
NOTE:
The maximum number of characters for the fax number is 20; use up to 25 characters for
the company name.
112
Chapter 10 Fax (M1210 Series only)
ENWW