Receive fax settings, Set fax forwarding, Set the answer mode – HP laserjet m1212nf User Manual

Page 134

Advertising
background image

6.

In the Cover Page Template drop-down box, select a template, and then select Pages in

Document Tray.

7.

Do one of the following:

Click Send Now to send the fax without previewing the cover page.

Click Preview to view the cover page prior to sending the fax.

Receive fax settings

Set fax forwarding

You can set your product to forward incoming faxes to another fax number. When the fax arrives at

your product, it is stored in the memory. The product then dials the fax number that you have specified

and sends the fax. If the product cannot forward a fax because of an error (for example, the number is

busy) and repeated redial attempts are unsuccessful, your product prints the fax.

If the product runs out of memory while receiving a fax, it terminates the incoming fax and only

forwards the pages and partial pages that have been stored in the memory.

When it is using the fax-forwarding feature, the product (rather than the computer) must be receiving

the faxes, and the answer mode must be set to Automatic.

1.

On the control panel, press the Setup button.

2.

Use the arrow buttons to select the Fax setup menu, and then press the

OK

button.

3.

Use the arrow buttons to select the Fax Recv. setup menu, and then press the

OK

button.

4.

Use the arrow buttons to select the Forward fax menu, and then press the

OK

button.

5.

Use the arrow buttons to select the On or Off option, and then press the

OK

button.

6.

If you turn on the fax-forwarding feature, use the keypad to specify the fax number where the fax

is to be sent, and then press the

OK

button to save the selection.

Set the answer mode

Depending on the situation, set the product answer mode to Automatic, TAM, Fax/Tel, or

Manual. The factory-set default is Automatic.

Automatic: The product answers incoming calls after a specified number of rings or upon

recognition of special fax tones.

TAM: The product does not automatically answer the call. Instead, it waits until it detects the fax

tone.

120

Chapter 10 Fax (M1210 Series only)

ENWW

Advertising