Use fax on a voip service, Fax memory, Send a fax – HP laserjet m1212nf User Manual

Page 143: Fax from the flatbed scanner, Use fax on a voip service fax memory send a fax

Advertising
background image

Use fax on a VoIP service

Voice over internet protocol (VoIP) services are often not compatible with fax machines unless the

provider explicitly states that it supports fax over IP services.

If the product experiences problems getting a fax to work on a VoIP network, verify that all cables and

settings are correct. Decreasing the fax-speed setting might allow the product to send a fax over a VoIP

network.

If faxing problems continue, contact the VoIP provider.

Fax memory

Fax memory is retained when there is a loss of power

The flash memory protects against data loss when a power failure occurs. Other fax devices store fax

pages in either normal RAM or short-term RAM. Normal RAM immediately loses data when power is

lost, while short-term RAM loses data about 60 minutes after a power failure occurs. Flash memory can

maintain its data for years without power applied.

Send a fax

Fax from the flatbed scanner

1.

Place the document face-down on the scanner

glass.

2.

Press the Setup button.

3.

Select the Phone Book menu, and then press

the

OK

button.

4.

From the list, select the phone book entry. If no

entry exists, use the keypad on the control

panel to dial the number.

5.

On the control panel, press the Send Fax

button. The product starts the fax job.

ENWW

Use fax

129

Advertising