Schedule a fax to be sent later – HP laserjet m1212nf User Manual

Page 148

Advertising
background image

Send a fax by dialing from a telephone connected to the fax line

Occasionally, you might want to dial a fax number from a telephone that is connected to the same line

as the product. For example, if you are sending a fax to a person whose device is in the manual

receive mode, you can precede the fax with a voice call to let that person know that the fax is coming.

NOTE:

The telephone must be connected to the product "telephone" port

.

1.

Load the document into the document feeder.

2.

Pick up the handset of a telephone that is connected to the same line as the product. Dial the fax

number by using the telephone keypad.

3.

When the recipient answers, instruct the person to start the fax machine.

4.

When you hear the fax tones, press theSend Fax

button, wait until Connecting appears on

the control-panel display, and then hang up the telephone.

Schedule a fax to be sent later

Use the product control panel to schedule a fax to be sent automatically at a future time to one or more

people. When this procedure is completed, the product scans the document into memory and then

returns to the Ready state.

NOTE:

If the product cannot transmit the fax at the scheduled time, that information is indicated on

the fax error report (if that option is turned on) or recorded in the fax activity log. The transmittal might

not be initiated because the fax-sending call is not answered, or because a busy signal stops the redial

attempts.

If a fax has been scheduled to be sent at a future time but it requires updating, send the additional

information as another job. All faxes that are scheduled to go to the same fax number at the same time

are delivered as individual faxes.

1.

Load the document into the document feeder.

134

Chapter 10 Fax (M1210 Series only)

ENWW

Advertising