HP laserjet m1212nf - Manual (Page 25)

Control-panel layout
M1130 Series
2 3 4 5
6 1
7
8 9 10 11
1 LED display screen: Displays the number of copies, the level of darkness for copies, and the percentage of copy-
size reduction or enlargement. It also shows error codes that alert you of problems that require attention.
2 Up and down arrows: Increases or decreases the number of copies, the level of darkness for copies, or the
percentage of copy-size reduction or enlargement.
● Press the buttons for less than one second to increase or decrease copy settings by one increment.
● Press the buttons for one second or longer to increase or decrease the level of darkness to the maximum or
minimum value.
● Press the buttons for one second or longer to increase or decrease the number of copies or the percentage of
copy-size reduction or enlargement by 10 increments.
3 Reduce/Enlarge copy light: Indicates the copy-size reduction or enlargement feature is active.
4 Darker/Lighter copy light: Indicates the copy-darkness feature is active.
5 Number Of Copies light: Indicates the number-of-copies feature is active.
6 Setup button: Scrolls between the copy settings for number of copies, darkness, and copy size for each job. The
default option is the number of copies. To change the default settings for all jobs, scroll to the setting and then press
and hold the button for 3 seconds. When the light is blinking, adjust the setting. Press this button again to save the
setting.
7 Start Copy button: Starts a copy job.
8 Cancel button: Cancels the current job, or clears the last setting you made. When the product is in the Ready
state, press this button to reset the copy settings to the default values.
9 Toner-level status light: Indicates the level of toner in the print cartridge is low.
10 Attention light: Indicates a problem with the product.
11 Ready light: Indicates the product is ready or is processing a job.
ENWW Product views 11