HP laserjet m1212nf - Manual (Page 26)

M1210 Series
4 5 6
1
2
8
3
13 12 11
9
15
7
14
10
1 Toner-level status light: Indicates the level of toner in the print cartridge is low.
2 Attention light: Indicates a problem with the product. View the LCD display for a message.
3 Ready light: Indicates the product is ready or is processing a job.
4 LCD display screen: Displays status information, menus, and messages.
5 Copy Settings button: Opens the Copy Settings menu. To copy an identification card, press this button three
times to open the Copy ID menu and then press the
OK button.
6 Setup button: Opens the menus.
7 Left and right arrows: Enter and navigate through the menus. Decrease or increase the current value on the
screen. Move the screen cursor backward or forward one space.
8 OK button: Acknowledges a setting or confirms an action to proceed.
9 Cancel button: Cancels the current job, or clears the last setting you made. When the product is in the Ready
state, press this button to reset the copy settings to the default values.
10 Start Copy button: Starts a copy job.
11 Back arrow: Returns to the previous level in the menus.
12 Send Fax button: Starts a fax job.
13 Redial button: Recalls the last digits used for the previous fax job.
14 Darker/Lighter copy button: Adjusts the darkness setting for the current copy job.
15 Numeric keypad: Use the keypad to enter fax numbers or to enter data.
12 Chapter 1 Product basics ENWW