Canon PowerShot G10 - Manual (Page 127)

125
Vari
ous Sh
oo
tin
g
Meth
od
s
Once the focus is fixed to a subject’s face, the frame can be set to
follow the subject within a certain range. The AF frame mode is set to
[Face Detect] in advance
(p. 121) .
Selecting a Subject to Focus On
(Face Select and Track)
Available Shooting Modes p. 298
1
Select a face to focus on.
1. Press the button while faces are detected by the camera.
• The camera enters face select
mode, and the face frame ( ) of
the main subject displays in white.
Even if the subject moves, the
frame will follow the subject within a
certain range.
• The face frame will not display
when a face is not detected.
2. Select the person you wish to focus on.
• When several faces have been
detected, pressing the or
button or turning the control dial will
move the face frame to another
subject.
• Holding down the DISP. button for
more than 1 second will display
face frames (up to 35) of all the
detected faces (green: face of main
subject, white: detected faces).
3. Press the button again.
• The camera exits face designation
mode, and the face frame ( ) of
the main subject will change to white (the frame will continue
to follow the subject within a certain range).
• Pressing the button will release the face designation mode.
Face Frame
Face Frame