Canon mp280 - Manual (Page 605)

Advanced Guide > Troubleshooting > An Error Code Is Displayed on the LED
U305
An Error Code Is Displayed on the LED
Alarm Lamp Is Lit Orange
When a machine error occurs, the Alarm lamp is lit orange and the error code as follows is
displayed on the LED. Check the error code displayed on the LED and take the appropriate action
to correct the error.
* Depending on the error occurred, the Alarm lamp is not lit.
Error Code Cause Action
E, 0, 2
(LED display)
The machine is out of
paper./Paper does not
feed. Reload the paper on the Rear Tray
correctly and press the
Black or
Color button.
E, 0, 3
(LED display)
Paper Output Tray is
closed./Paper jam.
If the Paper Output Tray is closed,
open it. The machine resumes
printing.
If opening the Paper Output Tray
does not resolve the problem, or if
the tray was open to begin with, the
paper may be jammed. Remove the
jammed paper, reload paper properly
in the printer, then press the
Black or
Color button.
Paper Jams
E, 0, 4
E, 0, 5
(LED display)
The FINE Cartridge cannot
be recognized. The FINE Cartridge may not be
installed properly, or the Cartridge
may not be compatible with this
machine.
Open the Scanning Unit (Cover) and
install the appropriate FINE
Cartridge. After that, push the Ink
Cartridge Locking Cover until it clicks
into place, then close the Scanning
Unit (Cover).
If the error is not resolved, contact the
service center.
E, 0, 7 FINE Cartridge is not Make sure that each FINE Cartridge
Page 605 of 707 pages An Error Code Is Displayed on the LED