Perations, Pecial features, Getting ready – Bissell 1005E User Manual

Page 6

Advertising
background image

S

pecial features

Removable water tank

The water tank is located on the back

of the Steam Mop. It can be refilled with

water any time during use. Distilled or

demineralized water may be used in

place of tap water.

Do not use chemicals with your

Steam Mop.

Water filter

This filter removes minerals and other

impurities from tap water, preventing

water deposits from damaging your

Steam Mop. It should be replaced when

the bright green grains turn blue. To

maximize performance of the filter, dis-

tilled water may be used.

Ready light

The ready light will glow when the

Steam Mop is ready to use.

steam on demand trigger

Press to release steam.

Manoeuvrable swivel head

When cleaning in the manual mode,

press the spray trigger to release water

and formula onto the area to be cleaned.

Microfibre mop pads

These washable, reusable microfibre

pads feature buit-in Microban® anti-

bacterial protection to help prevent the

growth of 99.9% of harmful bacteria on

the pad surface to keep your pad fresher

between uses.

Getting ready

The mop pad may have already come

attached to the swivel head, if not follow

steps 1A and 1B below.

1. Attach mop pad

A. Set swivel head in mop pad, making

sure the drawstring is located on

the back

B. Tighten mop pad by pulling on the

drawstring while pressing on

the toggle.

O

perations

1A

1B

Tip:

Do not attempt to use

your Steam Mop without

water in the tank.

w w w. b i s s e l l . c o m

6

Advertising