Table 3-24 – Cisco CIVS-IPC-2500 User Manual
Page 55
3-35
Cisco Video Surveillance System IP Camera User Guide
OL-14220-01
Chapter 3 Configuring and Managing the IP Camera
Status Windows
describes the messages that can appear in the IP camera log file. When you view the log file,
each message includes the date and time that it was logged.
Log List
Log List pane
Displays information from the log type or types that you specified.
For an explanation of each log message that can appear, see
Refresh
Click the Refresh button to update the information in the Log List pane.
Clear Log
Click the Clear Log button to delete all messages in the log file.
Table 3-23
Syslog & Log Window Options (continued)
Option
Description
Table 3-24
Syslog and Log Information
Message
Explanation
System log messages.
Note
These messages appear if you enable the System Log option.
Alert: Detected motion.
Alert generated by the IP camera detecting motion
in a configured video field.
Alert: Input Port Port_Number triggered.
Alert generated by the indicated port changing
state.
Audio: Disable microphone.
Captures information when audio devices are
enabled or disabled in the Audio window.
Audio: Disable speaker.
Audio: Enable microphone. (audio type: G.711
A-Law)
Audio: Enable microphone. (audio type: G.711
u-Law)
Audio: Enable microphone. (audio type: G.726)
Audio: Enable speaker.
DHCP: Lease release successfully.
Provides information about DHCP activities in
networks that include DHCP.
DHCP: Lease release unsuccessfully.
DHCP: Lease renewal successfully.
DHCP: Lease renewal unsuccessfully.
DHCP: Timeout error when renewing DHCP
lease.
DST: Adjust DST Number hour automatically.
The IP camera has automatically adjusted its clock
by the indicated number of hours for the beginning
or end of daylight saving time.
DST: DST begin.
The IP camera has adjusted its clock for the
beginning of daylight saving time.
DST: DST end.
The IP camera has adjusted its clock for the end of
daylight saving time.