Canon eos rebel g User Manual

Page 65

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

VI. Reference

AF control

TTL-CT-SIR (Through-the-Lens Cross-Type Secondary Image

Registration) with multiple BASIS (Base-Stored Image Sensor).

© One-Shot AF: AF locks when focus is achieved. Shutter can be

released only when focus is achieved.

© At Focus AF: Switches between One-Shot AF mode and Al Servo

AF automatically.

(§) Manual focusing: Enabled by setting the lens’ focus mode switch to

"M” and turning the focusing ring.

AF working range

EV 1,5-18 (at ISO 100, standard chart)

Focusing point selection © Automatic: Camera-selected.

@ Manual: User-selected.

AF-assist beam

Built-in AF-assist beam emitted automatically

Shutter

Vertical-travel, focal-piane shutter with all speeds electronically-

controlled,

Shutter speeds

30 to 1/2000 sec, (in half steps) and bulb. X-sync at 1/90 sec,

Self-timer

Electronicaily-controlied for 10-sec. delay.

Film loading

Automatic, After film is loaded and the back is closed, the film is pre­
wound.

Film advance

Automatic.

© Single-frame
© Continuous (Max. 1 frame per sec.)

Film rewind

Automatic at the end of the roll. Midroll rewind possible.

Built-in flash

Built-in, retractable flash head in the pentaprism with TTL autoflash

system, serially controlled.

© Guide No. 12 (in meters at ISO 100)
© Recycling time: Approx. 2 sec.
© Flash coverage: 28mm lens covered.

Flash contacts

X-sync for direct connection on hot shoe.

Power source

Two DL123A (or CR123A) lithium batteries.

Battery check

Battery level displayed automatically when Command Dial is set to any
mode except the Function Set Zone.

Dimensions (mm)

145.7 (W) x 92 (H) x 61.9 (D)

Weight

370 g (Body only, excluding batteries) j

Advertising