Cruise control, Principles of operation, Using cruise control (if equipped) – FORD 2014 E-450 v.1 User Manual
Page 141: Switching cruise control on, Using cruise control, 140 cruise control
PRINCIPLES OF OPERATION
Cruise control lets you maintain a set speed without keeping your foot
on the accelerator pedal.
USING CRUISE CONTROL (IF EQUIPPED)
WARNING: Do not use cruise control in heavy traffic, on
winding roads or when the road surface is slippery. This could
result in loss of vehicle control, serious injury or death.
WARNING: When you are going downhill, your vehicle speed
may increase above the set speed. The system will not apply the
brakes. Change down a gear to assist the system in maintaining the set
speed. Failure to do so could result in loss of vehicle control, serious
injury or death.
Note: Cruise control will disengage if your vehicle speed decreases more
than 10 mph (16 km/h) below your set speed while driving uphill.
The cruise controls are located on
the steering wheel.
Switching Cruise Control On
Press and release ON.
The indicator will turn on in the instrument cluster.
RES
SET
ACCEL
COAST
ON
OFF
140
Cruise Control
2014 Econoline (eco)
Owners Guide gf, 1st Printing, November 2012
USA (fus)