Setting a speed, Changing the set speed, Canceling the set speed – FORD 2014 E-450 v.1 User Manual
Page 142: Resuming the set speed, Switching cruise control off, Cruise control 141
Setting a Speed
1. Accelerate to the desired speed.
2. Press and release SET ACCEL.
3. Take your foot off the accelerator pedal.
Changing the Set Speed
Note: If you accelerate by pressing the accelerator pedal, the set speed
will not change. When you release the accelerator pedal, you will return
to the speed that you previously set.
• Press and hold SET ACCEL to increase or COAST to decrease the
set speed. Release the control when you reach the desired speed.
• Press and release SET ACCEL to increase or COAST to decrease.
The set speed will change in approximately 1 mph (2 km/h)
increments.
• Press the accelerator or brake pedal until you reach the desired
speed. Press and release SET ACCEL.
Canceling the Set Speed
Tap the brake pedal. You will not erase the set speed.
Resuming the Set Speed
Press and release RES.
Switching Cruise Control Off
Note: You will erase the set speed if you switch the system off.
Press and release OFF or switch the ignition off.
Cruise Control
141
2014 Econoline (eco)
Owners Guide gf, 1st Printing, November 2012
USA (fus)