Using advancetrac® with rsc® (if equipped), 136 stability control – FORD 2014 E-450 v.3 User Manual

Page 137

Advertising
background image

USING ADVANCETRAC® WITH RSC® (IF EQUIPPED)

The system automatically activates when you start your engine. The
AdvanceTrac with RSC system cannot be completely turned off, but the
electronic stability system and roll stability control portions of the
system are disabled when the transmission is in reverse (R). You can
turn off the traction control portion of the system independently. See the
Traction Control chapter.

AdvanceTrac with RSC Features

Button
functions

Stability

control light

TCS OFF

light

RSC/ESC

TCS

Default at
start-up

Illuminated

during bulb

check

Illuminated

during bulb

check

Enabled

Enabled

Button pressed
momentarily

Not

illuminated

Illuminated

solid

Enabled

Disabled

below

20 mph

(32 km/h)

Button pressed
again after
deactivation or
driving above
20 mph
(32 km/h)

Not

illuminated

Not

illuminated

Enabled

Enabled

If you switch off the traction control system below 20 mph (32 km/h),
the TCS OFF light will illuminate steadily. Press the TCS OFF button
again or if the vehicle is above 20 mph (32 km/h) to turn off the TCS
OFF light. The switch will not allow partial traction control system
disabling above 20 mph (32 km/h).

136

Stability Control

2014 Econoline (eco)
Owners Guide gf, 3rd Printing, September 2013
USA
(fus)

Advertising
This manual is related to the following products: