Setting liftgate open height, Locks 79 – FORD 2013 C-MAX Hybrid v.2 User Manual

Page 80

Advertising
background image

To close with the control on the
liftgate:
Press and release the
button.

WARNING: Keep clear of the liftgate when activating the rear
switch.

Setting Liftgate Open Height

1. Open the liftgate.

2. Manually move the liftgate to the desired height.

3. Press and hold the control button
on the liftgate until a chime is
heard, indicating the new height has
been programmed. Note: The
height cannot be programmed if the
liftgate position is too low.

The new open liftgate height will now be recalled when the power
liftgate is opened. To change the programmed height, repeat the above
procedure. Once the power liftgate is opened it can be manually moved
to a different height.

When operating the power liftgate after a lower height than full-open has
been programmed, the liftgate can be fully opened by manually pushing
it upward to the maximum open position.

Locks

79

2013 C-Max Full Hybrid (34h)
Owners Guide gf, 2nd Printing
USA
(fus)

Advertising
This manual is related to the following products: