Replacing the tire, 274 wheels and tires – FORD 2013 E-450 v.1 User Manual

Page 274

Advertising
background image

8. Remove any wheel trim. Insert the tapered end of the lug nut wrench
behind wheel covers or hubcaps and twist off.

9. Loosen the wheel nut by pulling up on the handle of the lug nut
wrench about one-half turn (counterclockwise). Do not remove the
wheel lug nuts until you raise the tire off the ground.

Replacing the tire

1. Assemble the jack handle sections together and lock into the jack. Use
the jack handle to slide the jack under the vehicle.

2. Position the jack to raise the front or rear wheel.

Jack at the specified locations to avoid damage to the vehicle.

Rear axle jacking points - All
models except E-350 Dual Rear
Wheel (DRW) and E-450:

Rear axle jacking points - E-350
Dual Rear Wheel (DRW) and E-450:

274

Wheels and Tires

2013 Econoline (eco)
Owners Guide gf, 1st Printing
USA
(fus)

Advertising
This manual is related to the following products: