Fuel filter, Maintenance and specifications – FORD 2012 F-550 v.2 User Manual

Page 385

Advertising
background image

WARNING: To reduce the risk of collision and injury, be
prepared that the vehicle speed may reduce and the vehicle may

not be able to accelerate with full power until the fluid temperatures
reduce.

The air conditioning may also cycle on and off during severe operating
conditions to protect overheating of the engine. When the engine coolant
temperature decreases to a more normal operating temperature, the air
conditioning will turn on once again.

If you notice any of the following:
• the engine coolant temperature gauge moves fully into the red (hot)

area

• the coolant temperature warning light illuminates
• the service engine soon indicator illuminates
1. Pull off the road as soon as safely possible and place the vehicle in P
(Park).

2. Leave the engine running until the coolant temperature gauge needle
moves away from the H range. After several minutes, if this does not
happen, follow the remaining steps.

3. Turn the engine off and wait for it to cool before checking the coolant
level.

WARNING: Never remove the coolant reservoir cap while the
engine is running or hot.

4. If the coolant level is normal, you may restart your engine and
continue on.

5. If the coolant is low, add coolant, restart the engine and take your
vehicle to an authorized dealer. See Adding engine coolant in this
chapter for more information.

Refer to fail-safe cooling for additional information.

FUEL FILTER

Your vehicle is equipped with a lifetime fuel filter (gasoline vehicles only)
that is integrated with the fuel tank. Regular maintenance or
replacement is not needed. For diesel engine information, refer to the
diesel supplement.

Maintenance and Specifications

385

2012 F-250/350/450/550 (f23)
Owners Guide, 2nd Printing
USA
(fus)

Advertising
This manual is related to the following products: