High beams, Flash-to-pass, Daytime running lamps (drl) (if equipped) – FORD 2012 Shelby GT 500 v.1 User Manual

Page 56: Lights

Advertising
background image

High beams
• Push the lever toward the

instrument panel to activate.

• Pull the lever toward you to

deactivate.

Flash-to-pass

Pull toward you, to the first detent,
to activate and release to deactivate.

Note: Vehicles equipped with HID
headlamps will hear an audible click
when activating this feature.

Daytime running lamps (DRL) (if equipped)

Turns the headlamps on with a reduced output (vehicles equipped with
halogen headlamps) or turns the front fog lamps on (vehicles equipped
with HID headlamps).

To activate:
• the ignition must be in the on position,
• the headlamp control is in the off or parking lamp position and
• the parking brake must be disengaged.

WARNING: Always remember to turn on your headlamps at
dusk or during inclement weather. The Daytime Running Lamp

(DRL) system does not activate the tail lamps and generally may not
provide adequate lighting during these conditions. Failure to activate
your headlamps under these conditions may result in a collision.

OFF

Lights

56

2012 05+ Mustang (197)
Owners Guide, 1st Printing
USA
(fus)

Advertising
This manual is related to the following products: