FORD 2012 Shelby GT 500 v.1 - Manual (Page 78)

Optional controls
ON/OFF: Press to turn the system on or off.
SET (+): Press to set a speed or to increase a set speed.
SET (–): Press to decrease a set speed.
RES / RESUME: Press to resume a set speed.
Setting speed control
The set speed control:
1. Press and release ON.
2. Accelerate to the desired speed.
3. Press and release SET (+).
4. Take your foot off the accelerator pedal.
5. The indicator light on the instrument cluster will turn on.
Note:
• Vehicle speed may vary momentarily when driving up and down a
steep hill.
• If the vehicle speed increases above the set speed on a downhill, you
may want to apply the brakes to reduce the speed.
• If the vehicle speed decreases more than 10 mph (16 km/h) below
your set speed on an uphill, your speed control will disengage.
Disengaging speed control
To disengage the speed control, tap the brake pedal or clutch pedal (if
equipped).
Disengaging the speed control will not erase previous set speed.
Resuming a set speed
Press and release RES / RESUME. This will automatically return the
vehicle to the previously set speed.
RESUME
OFF ON SET
SET
Driver Controls
78
2012 05+ Mustang (197)
Owners Guide, 1st Printing
USA (fus)