Installing dual rear wheel ornaments, Roadside emergencies – FORD 2011 F-550 v.1 User Manual

Page 336

Advertising
background image

19. Stow the flat tire. Refer to Stowing the flat/spare tire if the vehicle
is equipped with a spare tire carrier.

20. Stow the jack, jack handle and lug wrench. Make sure the jack is
securely fastened so it does not rattle when driving.

21. Unblock the wheels.

The following step applies to F–250/F–350 Single Rear Wheel
(SRW) vehicles only:

22. When installing the wheel center
ornaments, ensure that the
ornament retention towers on the
back side of the ornament are
aligned with the studs/lug nuts. The
retention towers are designed to be
installed over the studs/nuts and
retain to the flange on the lug nut.

If the ornament retention towers are
aligned between the studs/lug nuts,
the ornament is improperly
installed. This improper installation
may appear and sound correct, but
will not keep the ornament on the
vehicle. Ornaments improperly
installed in this manner will fall off
or become loose with minimal force
or impact.

Installing dual rear wheel ornaments

1. Align the ornament with the lug
nuts.
• (1) is the clip and (2) is the

flange.

1

2

Roadside Emergencies

336

2011 F-250/350/450/550 (f23)
Owners Guide, 1st Printing
USA
(fus)

Advertising
This manual is related to the following products: