Replacing headlamp bulbs (aerodynamic), Lights – FORD 2010 F-550 v.2 User Manual

Page 115

Advertising
background image

Replacing headlamp bulbs (aerodynamic)

1. Make sure that the headlamps are off, then open the hood.

2. Remove the bolts from the
headlamp assembly.

3. Pull the assembly straight out
disengaging two snap clips from the
fender.

4. Disconnect the electrical
connector by squeezing the release
tab and pushing the connector
forward, then pulling it rearward.

5. Remove the bulb assembly by
turning it counterclockwise and
pulling it straight out.

WARNING: Handle a halogen headlamp bulb carefully and keep
out of children’s reach. Grasp the bulb only by its plastic base

and do not touch the glass. The oil from your hand could cause the
bulb to break the next time the headlamps are operated.

Install the new bulb(s) in reverse order.

Lights

115

2010 F-250/350/450/550 (f23)
Owners Guide, 2nd Printing
USA
(fus)

Advertising
This manual is related to the following products: