Stopping and securing the vehicle, Location of the spare tire and tools, Roadside emergencies – FORD 2010 F-550 v.2 User Manual

Page 318

Advertising
background image

Stopping and securing the vehicle

WARNING: To help prevent the vehicle from moving when you
change a tire, be sure the parking brake is set, then block (in

both directions) the wheel that is diagonally opposite to the tire being
changed.

Refer to the instruction sheet (located in the glove box) for detailed tire
change instructions.

Park on a level surface, activate
hazard flashers and set the parking
brake.
• Automatic transmission: Place

gearshift lever in P (Park).

• Manual transmission: Place

gearshift lever in R (Reverse).

• Electronic Shift-On-the-Fly

(ESOF) 4x4: Place transfer case
in 4x4 HIGH or 4x4 LOW before
turning off the engine.

• Manual shift transfer case 4x4: Place transfer case in 4H or 4L.

Location of the spare tire and tools

If your vehicle is equipped with a spare tire, jack and associated tools,
refer to the following table for their locations:

Tool

Location

Spare tire (pick-up trucks only)

Under the vehicle, just forward of
the rear bumper

Jack

Regular cab and Crew Cab:
Fastened to floor pan behind
rearmost seat on passenger side
SuperCab: Under rear bench seat
on passenger side

Roadside Emergencies

318

2010 F-250/350/450/550 (f23)
Owners Guide, 2nd Printing
USA
(fus)

Advertising
This manual is related to the following products: