System check and vehicle feature customization, Instrument cluster – FORD 2010 F-550 v.2 User Manual

Page 34

Advertising
background image

System check and vehicle feature customization

Press the SETUP button repeatedly
to cycle the message center through
the following features:

Note: When returning to the SETUP menu and a non-English language
has been selected, HOLD RESET FOR ENGLISH will be displayed to
change back to English. Press and hold the RESET button to change
back to English.

RESET FOR SYSTEM CHECK

When this message appears, press the RESET button and the message
center will begin to cycle through the following systems and provide a
status of the item if needed.

1. OIL LIFE (Gas engine only)

2. ENGINE HOURS

3. CHARGING SYSTEM

4. DOOR AJAR

5. BRAKE SYSTEM

6. FUEL LEVEL

Note: Some systems show a message only if a condition is present.

OIL LIFE

This displays the remaining oil life.

An oil change is required whenever indicated by the message center and
according to the recommended maintenance schedule. USE ONLY
RECOMMENDED ENGINE OILS.

To reset the oil monitoring system to 100% after each oil change
(approximately 7,500 miles [12,000 km] or 12 months) perform the
following:

1. Press and release the SETUP button to display “OIL LIFE XXX%
HOLD RESET = NEW”.

RESET

SETUP

INFO

Instrument Cluster

34

2010 F-250/350/450/550 (f23)
Owners Guide, 2nd Printing
USA
(fus)

Advertising
This manual is related to the following products: