Using the infrared (ir) wireless headphones, Using wired headphones (not included), To adjust display brightness – FORD 2010 F-550 v.2 User Manual

Page 72: Entertainment systems

Advertising
background image

Using the infrared (IR) wireless headphones:

1. Press the power control on the earpiece to turn the headphones ON.

2. Select Channel A or B for each set of wireless headphones by using
the A/B control on the ear piece.

3. Adjust the headphone volume using the rotary dial on the earpiece.

Using wired headphones (not included):

WARNING: Do not leave children unattended in the vehicle and
do not let children operate the system while unsupervised. If

wired headphones or auxiliary systems are used, children may become
entangled in the cords and seriously injure themselves.

1. Connect the wired headphones in to the headphone jacks on either
side of the DVD system. Each side is labeled

A or

B. Headphones

plugged into jack A will listen to Channel A and headphones plugged into
jack B will listen to Channel B.

2. Adjust the volume levels using
the volume controls on the DVD
system.

Note: If your vehicle is equipped with a navigation system, volume
controls are only active in dual play mode

To adjust display brightness:

To decrease/increase the brightness
level on the display screen, press
the brightness control on the DVD
system. A display will appear at the
bottom of the screen indicating the
brightness level. The brightness display will only appear when the menu
is not displayed.

Entertainment Systems

72

2010 F-250/350/450/550 (f23)
Owners Guide, 2nd Printing
USA
(fus)

Advertising
This manual is related to the following products: