Engine oil, Checking the engine oil, Maintenance and specifications – FORD 2010 Fusion Hybrid v.3 User Manual

Page 278

Advertising
background image

To prolong the life of the wiper blades, it is highly recommended to
scrape off the ice on the windshield before turning on the wipers. The
layer of ice has many sharp edges and can damage the micro edge of the
wiper rubber element.

ENGINE OIL

Checking the engine oil
Refer to the scheduled maintenance information for the appropriate
intervals for checking the engine oil.
1. Make sure the vehicle is on level ground.
2. Turn the engine off and wait 15 minutes for the oil to drain into the
oil pan.
3. Set the parking brake and ensure the gearshift is securely latched in P
(Park).
4. Open the hood. Protect yourself from engine heat.

5. Locate and carefully remove the engine oil level dipstick.
6. Wipe the dipstick clean. Insert the dipstick fully, then remove it again.
• If the oil level is within the lower and upper holes/lines, the oil level is

acceptable. DO NOT ADD OIL.

• If the oil level is below the lower hole/line, engine oil must be added

to raise the level within the normal operating range.

• If required, add engine oil to the engine. Refer to Adding engine oil

in this chapter.

Maintenance and Specifications

278

2010 Fusion Hybrid (hfv)
Owners Guide, 3rd Printing
USA
(fus)

Advertising
This manual is related to the following products: