Tpms reset procedure, Tires, wheels and loading – FORD 2009 E-450 v.1 User Manual

Page 162

Advertising
background image

Please take the tool with the
provided Velcro

௡ strip on the back

and mount it in the bottom right
corner of your Owner’s Guide case
(as shown) for safe keeping.

If you find that the reset tool was not provided when delivered, has been
lost or no longer functions (the battery is not replaceable), please
contact your authorized dealer as soon as possible to obtain a
replacement.

To verify that your TPMS reset tool is working, press and release the
button on the center of the TPMS tool. The red light should illuminate
and remain on for approximately five (5) seconds. If the light does not
illuminate, the tool needs to be replaced.

TPMS reset tips:
• To reduce the chances of interference from another vehicle, TPMS

reset should be performed at least three feet (one meter) away from
another Ford Motor Company vehicle undergoing the TPMS reset
procedure at the same time.

• Do not wait more than two (2) minutes between resetting each tire

sensor or the system will timeout and the entire procedure will have
to be repeated on all four wheels.

• A double horn chirp indicates the need to repeat the procedure.

TPMS reset procedure

It is recommended that you read the entire procedure before attempting.

Note: To enter the reset mode, Steps 1–6 MUST be completed within
60 seconds.

1. Place the ignition in the off position and keep the key in the ignition.

2009 Econoline (eco)
Owners Guide, 1st Printing
USA
(fus)

Tires, Wheels and Loading

162

Advertising
This manual is related to the following products: