Front safety belt height adjustment, Safety belt warning light and indicator chime, Conditions of operation – FORD 2009 E-450 v.2 User Manual

Page 105: Seating and safety restraints

Advertising
background image

Front safety belt height adjustment

The front seat and outboard
positions are equipped with a height
adjuster. Adjust the height of the
shoulder belt so the belt rests
across the middle of your shoulder.

To adjust the shoulder belt height,
push the button and slide the height
adjuster down. Release the button
and pull down on the height
adjuster to make sure it is locked in
place.

To adjust the belt upward, slide the adjuster up. There is no need to
push the button. Pull down on the height adjuster to make sure it is
locked in place.

WARNING: Position the safety belt height adjusters so that the
belt rests across the middle of your shoulder. Failure to adjust

the safety belt properly could reduce the effectiveness of the seat belt
and increase the risk of injury in a collision.

Safety belt warning light and indicator chime

The safety belt warning light illuminates in the instrument cluster and a
chime sounds to remind the occupants to fasten their safety belts.

Conditions of operation

If...

Then...

The driver’s safety belt is not
buckled before the ignition switch
is turned to the on position...

The safety belt warning light
illuminates and the warning chime
sounds 4-8 seconds.

The driver’s safety belt is buckled
while the indicator light is
illuminated and the warning chime
is sounding...

The safety belt warning light and
warning chime turn off.

The driver’s safety belt is buckled
before the ignition switch is turned
to the on position...

The safety belt warning light and
the warning chime will remain off.

2009 Econoline (eco)
Owners Guide, 2nd Printing
USA
(fus)

Seating and Safety Restraints

105

Advertising
This manual is related to the following products: