Preparing to tow, Hitches, Safety chains – FORD 2009 E-450 v.2 User Manual

Page 186: Trailer brakes, Tires, wheels and loading

Advertising
background image

Towing a trailer places an additional load on your vehicle’s engine,
transmission, axle, brakes, tires and suspension. Inspect these
components carefully after any towing operation.

Do not exceed trailer weight of 5,000 lb (2,268 kg) when towing with
bumper only.

WARNING: Do not exceed the GVWR or the GAWR specified on
the certification label.

WARNING: Towing trailers beyond the maximum recommended
gross trailer weight exceeds the limit of the vehicle and could

result in engine damage, transmission damage, structural damage, loss
of vehicle control, vehicle rollover and personal injury.

Preparing to tow

Use the proper equipment for towing a trailer and make sure it is
properly attached to your vehicle. Contact your authorized dealer or a
reliable trailer dealer as soon as possible if you require assistance.

Hitches

Do not use or install hitches that clamp onto the bumper or to the axle.
Underbody hitches are acceptable if installed properly.

Safety chains

Always connect the trailer’s safety chains to the frame or hook retainers
of the vehicle hitch. To connect the trailer’s safety chains, cross the
chains under the trailer tongue and allow slack for turning corners.

If you use a rental trailer, follow the instructions that the rental agency
gives to you.

Do not attach safety chains to the bumper.

Trailer brakes

Electric brakes and manual, automatic or surge-type trailer brakes are
safe if installed properly and adjusted to the manufacturer’s
specifications. The trailer brakes must meet local and Federal
regulations.

2009 Econoline (eco)
Owners Guide, 2nd Printing
USA
(fus)

Tires, Wheels and Loading

186

Advertising
This manual is related to the following products: