Activating the memory feature, Deactivating the memory feature, Replacing the battery – FORD 2009 F-550 v.3 User Manual

Page 162: Locks and security

Advertising
background image

Activating the memory feature

To activate this feature:

1. Position the seat, adjustable pedals and mirrors to the position
desired.

2. Press and hold either memory 1
button or memory 2 button for five
seconds. A tone will be heard after
1

1

2

seconds when the memory store

is done, continue to hold until a
second tone is heard after five
seconds.

3. Within three seconds press
the

button on the keyfob.

The keyfob unlock will now recall
the memory position.

Deactivating the memory feature

To deactivate this feature:

1. Press and hold either memory 1 button or memory 2 button for five
seconds. A tone will be heard after 1

1

2

seconds when the memory store

is done, continue to hold until a second tone is heard after five seconds.

2. Within three seconds press the

button on the keyfob

The keyfob unlock will not recall the memory position.

Replacing the battery

The remote entry transmitter uses one coin type three-volt lithium
battery CR2032 or equivalent.

To replace the battery:

1. Twist a thin coin between the two
halves of the remote entry
transmitter near the key ring. DO
NOT TAKE THE RUBBER COVER
AND CIRCUIT BOARD OFF THE
FRONT HOUSING OF THE
REMOTE ENTRY TRANSMITTER.

2009 F-250/350/450/550 (f23)
Owners Guide, 3rd Printing
USA
(fus)

Locks and Security

162

Advertising
This manual is related to the following products: