To play a cd in the dvd system, Entertainment systems – FORD 2008 F-550 v.3 User Manual

Page 49

Advertising
background image

3. Press the power button on the
DVD player, then press Play (

)

to begin to play the disc.

If a DVD is already loaded into the
system, press PLAY on the DVD
player.

Note: If sound can be heard, but no video is present, press VIDEO to
select the video source (DVD or aux-inputs).

Press VIDEO to change the source
displayed on the screen. Press
repeatedly to cycle through:
DVD-DISC, DVD-AUX, NON-DVD,
OFF.

Press the power button to turn the
system OFF. The indicator light will
turn off indicating the system is off.

Note: The audio from the DVD system will play over all vehicle speakers
and can be adjusted by the radio volume control.

To play a CD in the DVD system:

The DVD system can play audio CDs, CD-R and CD-R/W, CD-ROM and
video CDs. To ensure proper disc operation, check the disc for finger
prints and scratches. Clean the disc with a soft cloth, wiping from the
center to the edge.

1. Ensure that the vehicle ignition is in the RUN or ACCESSORY
position.

2. Insert a CD into the system,
label-side up to turn on the DVD
system. It will load and
automatically begin to play. If there
is already a CD in the system, press
PLAY on the DVD player.

2008 F-250/350/450/550 (f23)
Owners Guide (post-2002-fmt)
USA
(fus)

Entertainment Systems

49

Advertising
This manual is related to the following products: